Reese 45012 TITAN RECEIVER - Manual

INSTALLATION INSTRUCTIONS
Product No.
45012
TOOLS REQUIRED
15/16” SOCKET
15/16” WRENCH
TORQUE WRENCH
You can take it with you.
SMALL PARTS
PACKAGE 45252 ELKHART, IN., OAKVILLE, ONT.
WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY
OCCUR DUE TO OVER TIGHTENING.
WARNING: DO NOT DRILL OR WELD TO THIS HITCH. IMPORTANT NOTES
USE ONLY REESE SUPPLIED OR APPROVED BOLTS, LOCKNUTS,
AND WASHERS TO INSTALL THIS HITCH
(OVER)
For Installation Assistance or Technical Help, Call 1-800-758-0869
45012IN-1JUL98A PCN4146 © 1998 REESE PRODUCTS, INC. Litho in USA
FORD F-250 F-350
WITH 37” FRAME
AND 10” DROP BUMPER
5/8” HEX BOLTS
BOLT PLATE
5/8” LOCK WASHERS
5/8” NUTS
5/8” FLAT WASHERS
1. Spare tire may need to be loosened for installation.
2. Insert a 5/8” hex bolt with bolt plate down through the rear holes in the frame. See diagram above.
3. Lift the hitch up to the frame. Align the rear holes in the hitch bracket with the 5/8” bolts. Install 5/8” flatwashers, 5/8” lock
washers and 5/8” nuts on the 5/8” bolts.
5/8” FLAT WASHERS
RECEIVER