Reese 35365 PREMIUM RECEIVER - Manual

REESE
INSTALLATION INSTRUCTIONS
Product No.
35365
You can take it with you.
SMALL PARTS
PACKAGE 36634
ELKHART, IN., OAKVILLE, ONT.
CHEVROLET & GMC VANS
WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY
OCCUR DUE TO OVER TIGHTENING.
WARNING: DO NOT DRILL OR WELD TO THIS HITCH. IMPORTANT NOTES
USE ONLY REESE SUPPLIED OR APPROVED BOLTS, LOCKNUTS,
AND WASHERS TO INSTALL THIS HITCH
TOOLS REQUIRED
(OVER)
For Installation Assistance or Technical Help, Call 1-800-758-0869
9/16" SOCKET
9/16" WRENCH
3/4" WRENCH
3/4" SOCKET
TORQUE WRENCH
1. Remove the two lower bumper support brackets, one per side; save the bolts and washers. Save the
bracket and return to the owner.
2. Place the left and right side brackets against the frame bottom. Install four 1/2" bolts removed in step
one. Leave the bolts loose.
3. Install the center section between the side brackets and install six 1/2" rib neck bolts, lock washers and
nuts on the bolts. See the diagram above.
1/2" SERRATED WASHER
1/2" LOCK WASHER
1/2" NUT
CENTER SECTION
1/2" RIB NECK BOLT
1/2" CARRIAGE BOLT
BOLT PLATE
1/2" HEX BOLT
3/8" SERRATED WASHER
3/8" LOCK NUT
1/2" LOCK WASHER
1/2" NUT
35365IN-1SEP97M PCN3666 © 1997 REESE PRODUCTS, INC. Litho in USA