Reese 36099 PREMIUM RECEIVER - Manual

REESE
INSTALLATION INSTRUCTIONS
Product No.
36099
You can take it with you.
SMALL PARTS
PACKAGE 36970
ELKHART, IN., OAKVILLE, ONT.
FORD F150 PICK-UP
WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY
OCCUR DUE TO OVER TIGHTENING.
WARNING: DO NOT DRILL OR WELD TO THIS HITCH. IMPORTANT NOTES
USE ONLY REESE SUPPLIED OR APPROVED BOLTS, LOCKNUTS,
AND WASHERS TO INSTALL THIS HITCH
TOOLS REQUIRED
3/4” Socket
Torque Wrench
For Installation Assistance or Technical Help, Call 1-800-758-0869
1. Locate the existing holes in the frame rails of the vehicle that correspond to the holes in the receiver
brackets. Insert a 1/2" carriage bolt with a bolt plate down through the holes in the frame. See the diagram
above.
2. Lift the brackets up to the frame.
1/2” FLAT WASHER
1/2” LOCK WASHER
1/2” NUT
1/2” CARRIAGE BOLT
BOLT PLATE
1/2” RIB NECK BOLT
1/2” LOCK WASHER
1/2” NUT
(OVER)
36099IN-1APR01C PCN5529 © 2001 REESE PRODUCTS, INC. Litho in USA