Quick startup guide, Connect a vt 100 async terminal, or personal co, Hold down the control key and press r; then pre – ADTRAN 1200070L1 User Manual
Page 17: Using the arrow keys and enter key to navigate, Use the left arrow key or the escape key to go, Connect the isdn line to the rj-45 jack labeled, When the loop led remains solid, the express xl, If using a pots phone with the express xlt, con
61200.070L1-1
Express XL/XLT User Manual
1
Quick Startup Guide
SETTING UP THE ISDN LINE
Before configuring the Express XL/XLT, ensure that the telephone service has
provided the switch type, service profile identification (SPID), and local direc-
tory number (LDN).
Example:
Switch Type
National ISDN-1
SPID1
20555512120100
SPID2
20555512130100
LDN1
5551212
LDN2
5551213
1.
Connect a VT 100 async terminal, or personal computer with a terminal
emulator running 9600 N-8-1, to the
MAINTENANCE
port.
2.
Hold down the
Control
key and press
R
; then press
Enter
to display the
top menu.
3.
Using the arrow keys and
Enter
key to navigate the menu, go to the
Con-
figuration/WAN/ISDN/Dial Line
menu. Enter the SPIDs, LDNs, and
switch type.
4.
Use the left arrow key or the
Escape
key to go back up the menu tree.
When asked to save ISDN parameters, type
y
.
5.
Connect the ISDN line to the RJ-45 jack labeled
ISDN BRI U
on the rear
panel.
6.
When the Loop LED remains solid, the Express XL/XLT is ready for call-
ing.
7.
If using a POTS Phone with the Express XLT, connect the POTS telephone
to the POTS port.
If the SPID(s) does not work or is unknown, try activating the ExpertISDN
™
feature.
First enter the area code and local directory number(s); then press the
Enter
key over
the ExpertISDN activator.