Reese 33018 PROFESSIONAL RECEIVER - Manual (Page 2)

Reese warrants its Hitches, custom Hitch Receivers, and Sway Controls from date of purchase against defects in material and workmanship under normal use and
service, ordinary wear and excepted, for the ownership life of the original consumer purchaser. Reese will replace FREE OF CHARGE any part which proves defective in
material or workmanship when presented to any Reese dealer, Reese Warehouse or return to factory. TRANSPORTATION CHARGES PREPAID, at the address
below. THIS WARRANTY IS LIMITED TO DEFECTIVE PARTS REPLACEMENT ONLY. LABOR CHARGES AND/OR DAMAGE INCURRED IN INSTALLATION OR
REPLACEMENT AS WELL AS INCIDENTAL AND CONSEQUENTIAL DAMAGES CONNECTED THEREWITH ARE EXCLUDED. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any damage to the Hitch, Custom Hitch receiver
or Sway Control as a result of misuse, abuse, neglect, accident, improper installation, or any use violative of instructions furnished by us, WILL VOID THE WARRANTY.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. In the event of a problem
Reese warrants its Hitches, Custom Hitch Receivers and Sway Controls from date of purchase against defects in material and workmanship under normal use and
service, ordinary wear and tear excepted, for the ownership life of the original consumer purchaser.
with warranty service or performance, you may be able to go to a small claims court, a state court, or a federal district court.
Towing Products
PO Box 8102
47774 Anchor Ct.
Plymouth, MI 48170 Towing Products
2351 Winston Park Drive
Oakville, Ontario
Canada L6H6R7
LIMITED WARRANTY
THIS PRODUCT COMPLIES WITH SAFETY SPECIFICATION AND REQUIREMENTS FOR THE STATE OF NEW YORK AND VESC REGULATION V-5 FOR CONNECTING DEVICES AND
TOWING SYSTEMS. WEIGHT DISTRIBUTING HITCH RATING IS 7500 LB. MAX. GROSS TRAILER WEIGHT AND 750 LB. MAX. TONGUE WEIGHT. WEIGHT CARRYING HITCH RATING IS
5000 LB MAX GROSS TRAILER WEIGHT AND 500 LB MAX TONGUE WEIGHT. CONSULT VEHICLE OWNERS MANUAL FOR TOWING RECOMMENDATIONS AND LIMITATIONS.
6. Torque the 12mm bolts to 75 ft*lb*.
Torque the 1/2” nuts to 75 ft*lb*.
Torque the 3/8” nuts to 35 ft*lb*.
7. Check the fit of the plastic trim piece. Be sure the holes in the trim piece align with the holes in the bumper. Trim a little more
if needed.
8. The plastic bumper must be clean before attaching the trim piece. Avoid applying the trim piece at
temperatures below 65 deg. The adhesive strips won’t work well. Using the supplied cleaner, clean
the area of the bumper cover where the trim piece will make contact.
9. Loosely reattach the center two rivets through the trim piece and the bumper cover. Pull the top of the trim piece toward you
and remove the tape from the adhesive strips. Push the trim piece firmly against the bumper.
10. Reinstall any remaining rivets in the bottom of the bumper.
Remove these two plastic rivets to apply the cutting template.
For Installation Assistance or Technical Help, Call 1-574-537-6993
or check our web site www.reeseprod.com
33018IN-15NOV02 PCN6129 © 2002 TOWING PRODUCTS Litho in USA