Reese 44707 PROFESSIONAL RECEIVER User Manual

Installation instructions, Mitsubishi outlander (except sport), Part numbers

Advertising
background image

Installation Instructions

Mitsubishi Outlander

(Except Sport)

Part Numbers:

44707

75888

87656

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 14mm,17mm, ¾”

Drill Bits: None

1.

Lower exhaust by disconnecting (3) rubber exhaust hangers from muffler.

2.

Remove tow hook from driver side vehicle frame. Return tow hook & fasteners to owner.

3.

Raise hitch into position, install all fasteners as shown.

4.

Raise exhaust back into position by re-connecting rubber exhaust hangers (re-attach muffler to exhaust pipe if removed in step 1).

Tighten all M10 x 1.25 CL8.8 fasteners with torque wrench to 42 Lb.-Ft. (57 N*M)

Tighten all ½-13 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

©

2014 Cequent Performance Products

– Printed in México

Sheet 1 of 3

75888N

1/20/2014

Rev. X1

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent
entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working beneath a
vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and
SAE J684.

Fastener Kit: 75888F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Hitch type

Max Gross

Trailer WT (LB)

Max Tongue

WT (LB)

Weight Distributing

4000 (1816 Kg.)

600 (272 Kg.)

Weight Carrying

Ball Mount

4000 (1816 Kg.)

600 (272 Kg.)

Wiring Access Location: SUV3, SUV4

Form: F205 Rev A 5-6-05

Plastic Fascia

Existing Weldnut

j

m

Vehicle Frame

j

Qty. (2)

Hex Bolt

– M10 x 1.25 X 40mm CL8.8

m

Qty. (4)

Flanged Lock Nut

– 1/2-13

k

Qty. (2)

Conical Toothed Washer

– 3/8”

n

Qty. (4)

Hardened Flat Washer 1/2”

l

Qty. (4)

Carriage Bolt

– 1/2-13 X 4-1/2 GR5

Note: All Fasteners Typical Both Sides of Vehicle.

l

k

Removal of spare tire will make installation easier.

Accessory Rating

C

n

Advertising