Reese 30149 RAIL KIT ACCESSORY User Manual
Reese For the car
DEALER/INSTALLER:
TOOLS NEEDED:
INSTALLATION INSTRUCTIONS
REESE
Elite Series
PLASTIC BED LINER PUCK ADAPTOR
®
™
DEALER/INSTALLER:
(1) Read all instructions before installation
(2) Provide this Manual to end user.
END USER:
(1) Save this Manual for future reference.
(2) Pass on copies of Manual to any other user or owner of Hitch.
TOOLS NEEDED:
3 1/4” HOLE SAW
DRILL
3/8” ALLEN SOCKET
RATCHET
TORQUE WRENCH
1. Cut 3‐1/4” hole in bed liner at the 4 locations. (See rail kit
installation instructions for locations)
Button head bolt
(Supplied with rail kit)
2. Place spacer block 2 in rail.
3. Attach trim ring on puck 1 . (See Fig. 2)
4. Place puck 1 into rail.
1
Lock washer
(Supplied with rail kit)
(Supplied with rail kit)
5. Place lock washer and bolt in to puck and torque to 110 ft‐lbs.
6. Repeat steps 1 through 5 for the other 3 locations.
2
Trim ring
(Supplied with rail kit)
No gap
ITEM NO
PART DESC
QYT
Fig. 1
Fig. 2
30149N – 2NOV10A
PCN13863
©2010 CEQUENT PERFORMANCE PRODUCTS, INC.
LITHO IN USA
1
ITEM NO.
PART DESC.
QYT.
1
PUCK
4
2
SPACER BLOCK
4
For Installation Assistance or Technical Help, Call 1‐888‐521‐0510