Reese 30142 18K ELITE SERIES - Manual (Page 7)

Figure 10A: Anchor Handles
in Unlocked Position
Figure 10B: Anchor Handles
in Locked
Position(overlapped)
Locking Hole Tabs in Handles
overlap and Protrude through
Base Arch
Figure 11: Pinning Anchor
Handles
Base Arch
10. If not already installed the Left hand and Right hand torsion springs will need to be added to the center section
so that the coil is facing the rear of the truck and wide hook sits over casting as shown in Figure 12. Tighten
1/4-20 X 1 1/2 BOLT with 7/16 socket to 8 ft.lbs.
Right Torsion Spring
1/4 20 X 1 1/2 BOLT
Tube Spacer
Washer
Front of Truck
1/4-20 X 1 1/2 BOLT
Left Torsion Spring
30143IN – 12JAN10A PCN12853 2010 CEQUENT PERFORMANCE PRODUCTS, INC LITHO IN USA
FOR KITS 30142 & 30143
7
Figure 12: Torsion Spring Assembly