Reese 30074 RAIL KIT User Manual

Installation instructions, Part numbers

Advertising
background image

Part Numbers:

30074

Rev. F

6-27-07

30074N

Sheet 1 of 11

z

2006, 2007 Cequent Towing Products

Installation Instructions

READ THOROUGHLY BEFORE BEGINNING

Signature Series Rail Kit

Dodge Ram Trucks-all, including Mega-cabs

GUIDELINES FOR MATCHING TOW VEHICLE AND TRAILER

WARNING:

Failure to follow all of these instructions may result in death or serious injury!

INDEX

WARNING:

Failure to check and follow tow ratings could result in tow vehicle

damage or truck and trailer separation while towing.

Trailer and its contents together must not exceed truck, hitch and/or trailer tow
ratings.

Towing vehicle must have a manufacturer’s rated towing capacity equal to or
greater than the gross trailer weight (dry weight of the trailer plus payload of the
trailer). Figure1.

Gross weight of trailer must not exceed fifth wheel hitch rating.

King pin weight must not exceed fifth wheel rating, Figure 2. If in doubt have king
pin weight measured by a qualified technician.

1.

GUIDELINES FOR MATCHING TOW VEHICLE AND TRAILER.

Pages 1 - 3

2.

DRILLED AND BOLTED INSTALLATION FIGURE.

Page 4

3.

NO-DRILL, CLAMPED ON INSTALLATION FIGURE.

Page 5

4.

ASSEMBLY INSTRUCTIONS.

Pages 6 – 10

5.

CEQUENT TOWING PRODUCTS SEVEN YEAR LIMITED WARRANTY.

Page 11

FACTORY TRAILER + FULL WATER

TANKS + CARGO, ETC.

= GROSS TRAILER WEIGHT

Figure1.

1. Check Tow Ratings:

Vehicle Tow Rating:_______________________.

Signature Series

Hitch Rating:__________________.

Gross Trailer Weight Figure 1:______________.
*Trailer weight should be the lowest of these recorded ratings for safe towing conditions.

2. Cequent Towing Products hitches are designed for use with recreational fifth wheel trailers only. Hitch applications other than

recreational fifth wheel trailers must be approved in writing by Cequent Towing Products Engineering Department.

3. Use only a SAE 2-inch kingpin with your

Signature Series

Fifth Wheel Hitch.

4. Approximately 15%-25% of trailer weight should be on hitch (Pin Weight), Figure2.

15-25%

GROSS TRAILER

WEIGHT

(PIN WEIGHT)

75-85%

GROSS TRAILER

WEIGHT

Figure 2.

Advertising