Reese 30064 RAIL KIT - Manual (Page 7)

7
30064IN – 8-21-08, rev E PCN11321 ©2005, 2008 CEQUENT TOWING PRODUCTS, INC. Litho in USA
7. Attach rear rail brackets to rear rail angle using 5/8” X 4” (three) bolts, 5/8” X 1 1/2” bolt, lock washers, flat washers,
and welded nuts on rear rail angle ( Figure 13 ). Use the 1 1/2” bolt for attaching the passenger side bracket inside
location. Tighten bolts to hand tight. First torque driver side bolts to 180 ft.lbs. then torque passenger side to 180
ft. lbs.
5/8” X 4” hex head bolts
3 places
5/8” washers
5/8” lock washers
4 places
5/8” X 1 1/2” hex head bolt
Rear rail bracket
2 places
Figure 13
8. Loosely attach frame brackets to rails using 5/8” X 1 1/2" long bolts, flat washer & lock washers, ( Figure 14 ).
Front of
vehicle
5/8” lock washer
4 places
Figure 14
5/8” X 1 ½” bolts
4 places
5/8” flat washer
4 places
Front of
vehicle
9. Align holes in frame bracket with mounting holes in chassis rails ( Figure 15 ). Remove jounce block from chassis
frame rails above axle.
Front of
vehicle
Figure 15
Jounce Block
Mounting holes