Reese 56002 OUTBOARD CUSTOM QUICK INSTALL KIT - Manual (Page 4)

For Installers
For corresponding REESE ® Custom Quick Install Mounting Kit part number as well as latest revision of installation instructions
please refer to ( www.REESEPROD.COM ).
1. REESE ® Custom quick install mounting kit for 30153 REESE ® rails kit only.
2. Do not install mounting rails over plastic bed liners. Plastic bed liners must be cut out of the way. Base rails may be
installed on spray in liner. Note: Consult installer for recommended curing time.
3. Use only CEQUENT PERFORMANCE PRODUCTS, INC. supplied bolts, nuts, and washers to install this kit. All bolts are
Grade 8 hardware, unless otherwise noted.
4. See that owner receives and fills out warranty information page.
Owner Responsibilities
•Refer to mounting bracket rating label for correct weight capacity.
•Check mounting system bolt tightness once per year
•Save warranty sheet and receipt for any future support
LIMITED LIFETIME WARRANTY
Part No:_______________________________ Date of Original Purchase:____________
©
2011 Cequent Performance Products, Inc.
Sheet 4 of 12 56002N 9/8/11 Rev. A
Original Owner:_________________________ Original Installer:____________________
1. Limited Lifetime Warranty (“Warranty”). Cequent Performance Products, Inc. ("We" or “Us”) warrants to the original
consumer purchaser only ("You") that the product will be free from material defects in both material and workmanship, ordinary
wear and tear excepted; provided that installation and use of the product is in accordance with product instructions. There are no
other warranties, express or implied, including the warranty of merchantability or fitness for a particular purpose. This warranty
is not transferable.
2. Limitations on the Warranty. This Warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect,
misuse, or as a result of any accident or in any other manner; (c) damage from misapplication, overloading, or improper
installation; (d) improper maintenance and repair; and (e) product alteration in any manner by anyone other than Us, with the
sole exception of alterations made pursuant to product instructions and in a workmanlike manner.
3. Obligations of Purchaser. To make a Warranty claim, contact Us, at our principal address of 47912 Halyard Dr. Suite 100,
Plymouth, MI 48170, 1-888-521-0510, identify the product by model number, and follow the claim instructions that will be
provided. Any returned product that is replaced by Us becomes our property. You will be responsible for return shipping costs.
Please retain your purchase receipt to verify date of purchase and that You are the original consumer purchaser. The product and
the purchase receipt must be provided to Us in order to process Your Warranty claim.
4. Remedy Limits. Product replacement is Your sole remedy under this Warranty. We shall not be liable for service or labor
charges incurred in removing or replacing a product or any incidental or consequential damages of any kind.
5. Assumption of Risk. You acknowledge and agree that any use of the product for any purpose other than the specified use(s)
stated in the product instructions is at Your own risk.
6. Governing Law. This Warranty gives You specific legal rights, and You also may have other rights which vary from state to
state. This Warranty is governed by the laws of the State of Michigan, without regard to rules pertaining to conflicts of law. The
state courts located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes relating to this Warranty.
Cequent Performance Products, Inc.
47912 Halyard Dr. Suite 100
Plymouth, MI 48170