Reese 56001 OUTBOARD CUSTOM QUICK INSTALL KIT - Manual

* 5/16” THICK
SPACER (10)
* ½” x 2” CARRIAGE
BOLT (10)
DRIVERS
SIDE
FRAME
* ½” SERRATED WASHER, &
NUT (10)
1
4
6 5
2
3
VEHICLE FORWARD
Figure 1
ACCESS
HOLE
Equipment Required:
Fastener Kit: 56001F
Wrenches: ¾” & 15/16”
Drill Bits: 1/8” & 9/16” Drill
Other Tools: Center Punch, Measuring Tape
WARNING:
Under no circumstances does Cequent Performance Products, Inc. recommend exceeding the towing vehicle
manufacturers recommended vehicle towing capacity.
2011, 2014 Cequent Performance Products, Inc. - Printed in Mexico Sheet 1 of 12 56001N 04/16/14 Rev. C
Installation Instructions
REESE ® SERIES CUSTOM QUICK
INSTALL MOUNTING KIT
2011 & up Chevrolet/GMC 2500/3500
6’6”, & 8’ Bed Pickup Installation
Part Number
56001
READ ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION
4
3
ITEM # DESCRIPTION QUANTITY ITEM # DESCRIPTION QUANTITY
1 FRAME BRACKET, LH 1 4 SQUARE HOLE PLATE 4
2 FRAME BRACKET, RH 1 5 5/8" SERRATED WASHER 4
3 5/8-11 x 2" CARRIAGE BOLT 4 6 5/8-11 HEX NUT 4
7 5/8-11 PULL WIRE 4
7
PULL WIRE
ASSEMBLY
Free end of pull wire
Fasteners shown with (*) are supplied with rail kit 30153. **
Custom Quick Install mounting brackets only include the hardware to attach the custom brackets to the frame..