Reese 61302 SIDEWINDER - Manual (Page 2)

Installation Instructions
Sidewinder
TM
Turret
Matching Wing Sets
Figure 3
For Wing Set Make and Model Numbers:
Dexter 221-0033-00
Dexter 221-0031-00
Use The Bolt Hole Locations Noted By The “B”
The pattern is a 7” horizontal & a 1 1/2” vertical
Trailer Forward
Typical Bolting
H d Kit C t i Hardware Kit Contains:
Item#
1) (12) ½”-13x2 Grade 8 Bolts
2) (12) ½”-13 Grade 8 Nuts
3) (12) ½” Flat Washers
4) (12) ½” Conical Lock Washers
Bolts & Flat Washers Are Installed From The Outside, Conical Lock Washers and Nuts On the Inside.
Torque All To 150 ft. lbs. Install as many bolts as the hole pattern will allow. That should be 5 or 6 per side.
(2) 1/2-13 Gr.8 Nut
(4) 1/2 Conical Lock Washer
Typical Wing
(3) 1/2 Flat Washer
(1) 1/2-13x2 Gr.8 Bolt
2009 Cequent Performance Products, Inc Sheet 2 of 3 61302IN 5/3/2011 Rev. A
Form: F205 Rev A 5-6-05