Reese 61300 SIDEWINDER - Manual

Installation Instructions
Sidewinder Turret TM
Part Number:
61300
Turret Shown Assembled With Arm
Equipment Required:
Wrenches: 15/16”
Drill Bits: Not Required
Torque Wrench
INDEX
1. GUIDELINES FOR MATCHING WING SET P. 1-2
2. ASSEMBLY INSTRUCTIONS P. 2
3. 5 YEAR LIMITED WARRANTY P. 3
z 2009 Cequent Performance Products Sheet 1 of 3 61300 12/08/2010 Rev. A
j
Qty. (1) Turret 61300 (Formally ST100 & ST200)
k
Qty. (1) Upper Wear Plate
l
Qty. (1) Bushing
m
Qty. (1) Hardware Kit
Fastener Kit: 61300F
Do Not Exceed Lower of Towing Vehicle Manufacturer’s Rating,
Trailer Manufacturer’s Rating or
Max Gross
Trailer WT (LB)
Max Pin
WT (LB)
19,500 LB 3,900 LB
Form: F205 Rev A 5-6-05
DEALER/INSTALLER:
(1) Provide this Manual to end user
END USER:
(1) Read and follow this Manual for Sidewinder Turret Installation.
(2) Save this Manual for Future Reference.
(3) For Sidewinder Arm Installations, Refer to Arm Installation Manuals.
(4) Pass on copies of Manual to any other users or owner.
WARNING:
Failure to follow all of these instructions may result in death or serious injury!
Figure 1
4
2
3
1
Note: These Instructions Are Only For Installation Of Turret Into Wing Sets.
You Should Refer To The Installation Instructions For Your Sidewinder Arm.
Figure 2 For Wing Set Make and Model Numbers:
Lippert 1621
Lippert 1621HD
Lippert 0719
Fabex PB-600 Series
Use The Bolt Hole Locations Noted By The “A”
The pattern is a 7.875” horizontal & a 2” vertical
Trailer Forward
Matching Wing Sets