Reese 49150 SAFETY CHAINS - Manual

Installation Instructions
Goose Box Safety Chain Kit
Part Number:
49150
Equipment Required:
Wrenches: 3/4”
Drill Bits: Not Required
Misc. : 3/4” Socket & Torque Wrench
INDEX
1. Explosion, Parts Identified, Instructions P. 1
2. 5 Year Limited Warranty P. 2
2009 Cequent Performance Products, Inc Sheet 1 of 2 49150IN 08/07/13 Rev. B
1 Qty. 1 Goose Box (94621 or 94622)
2 Qty. 2 44” Chain w/Hook (123545)
3 Qty. 2 ½“ Washer Flat (01160008)
4 Qty. 2 ½“ Nuts (122399)
5 Qty. 2 ½”-13x2.25 Bolts (01150009)
6 Qty. 2 ½” Lockwasher (01129008)
Fastener Kit: 49150F
Do Not Exceed Lower of Towing Vehicle Manufacturer’s Rating,
Trailer Manufacturer’s Rating or
Max Gross
Trailer WT (LB)
Max Pin
WT (LB)
16,000 LB 3,200 LB
Form: F205 Rev A 5-6-05
DEALER/INSTALLER:
(1) Provide this Instructions to end user
END USER:
(1) Read and follow these Instructions for the Reese Goose Box
Safety Chain Kit Installation.
(2) Save these Instructions for Future Reference.
(3) Pass on copies of the Instructions to any other users or owner.
WARNING
Failure to follow all of these instructions may result in death or serious injury!
Figure 1
4/6
2
3
1
5
2
Locate Safety Chain Mounting Lugs On The
Underneath Rear Of Your Goose Box. As Shown
In Figure 1. Put Flat Washer Onto Bolt, Next Put Bolt
And Washer Through Last Link In Chain, Then
Position Bolt, Washer, And Chain Assy’ Through
Hole In The Mounting Lug, Secure With The Nut And
Lockwasher.
Tighten Bolt, Torque To 110 Ft. Lbs. Do The Same
For Both Chains.