Rivers Edge RE712 14' PERIMETER - Manual (Page 5)

TREESTANDS
Page 5
HuntRiversEdge.com
14' Perimeter ™ Ladder Pod (RE712)
HuntRiversEdge.com
800-450-EDGE (3343)
NOTE: Make sure foot pads are orientated out, away from
platform.
16. Secure top legs to the leg pockets attached to platform using (2) provided
1/4-20 x 2-1/4” bolts and locknuts. SEE FIGURE 7.
17. Attach (4) dual support brace tabs (TP146) to each remaining joint
locations of the leg assemblies (4 total locations) and secure those
locations using (4) provided 1/4-20 x 2-1/4” bolts and locknuts.
SEE
FIGURE 7.
18. a. Locate the (2) 12” male cross braces (TP149) and (2) 60” female cross
braces (TP131). Insert the male cross braces into the female cross braces.
Using (2) provided 1/4-20 x 1-1/4” bolts and locknuts, secure these cross
braces in the hole location listed for pole length A.
SEE FIGURE 8.
b. Locate the (2) 36” male cross braces (TP132) and (2) 60” female cross
braces (TP131). Insert the male cross braces into the female cross braces.
Using (2) provided 1/4-20 x 1-1/4” bolts and locknuts, secure these cross
braces in the hole location listed for pole length C.
SEE FIGURE 8.
wARNING
BE CERTAIN ALL LADDER AND LEG SECTIONS HAVE
THE BOLTS GOING THROUGH PROVIDED HOLES IN
EACH SECTION. DO NOT CRUSH TUBING wHEN
TIGHTENING.
DOUBLE AND TRIPLE CHECK ALL NUT AND
BOLTS TO MAKE SURE ALL HAVE BEEN TIGHT-
ENED SECURELY.
FIGURE 7
(4) dual support brace tabs
ladder foot pad
(facing outward)
(2)1/4-20 x 1-1/2" bolts
(6) 1/4-20 x 2-1/4" bolts
locknuts
locknuts
locknuts
J-receiver tubes
(6) 1/4-20 x 1-3/4" bolts
FIGURE 8
e (appx. 99-3/4")
D (appx. 92-3/4")
A (appx. 67"))
(2 total)
(2 total)
(2 total)
48" male crossbraces
60" female cross braces
1/4-20 x 1-1/4" bolts and locknuts
(2 total)
C (appx. 91-1/8")
12" male crossbraces
36" male crossbraces
(6) single support
brace tabs