ANUBIS TYPHOON SPEEDNET WIRELESS PCMCIA CARD - Manual (Page 8)

Typhoon Speednet Wireless PCMCIA Card
7
C h a p t e r
2
Installation Procedure
If you are using Windows 98/2000/ME, please read the following instructions.
Before you proceed with the installation, it is important for you to know…
Note1: The following installation was operated under Windows 98. (Procedures will be the
same for Windows 2000/ME. If you are using Windows XP, please turn to page 9.)
Note2: If you have installed the Wireless PCMCIA Card driver & utility before, please uninstall
the old version first.
Note3: Be sure not to insert the Wireless PCMCIA Card before the installation is finished.
A. Execute the “Setup.exe” program under the “Driver & Utility” folder. The InstallShield
Wizard will check the operating system version first. Please follow the directions after it
finishes checking.
B. To install the device you must accept the “License Agreement.” To continue the
process, please select “Yes”, or select “No” to cancel the installation.