Set up instructions – Robinair 34100 Automatic A-C Charging Station User Manual

Page 5

Advertising
background image

3

R-134a Smart Cart

®

Automatic A/C Charging Station

INSTALLING A REFRIGERANT TANK

Follow these steps to install a refrigerant
tank on the charging station.

WARNING

Always wear safety goggles when
working with refrigerants.

Read and

follow all warnings at the beginning of
this manual before operating the unit.

Connecting hoses to the wrong ports
may cause personal injury or may
damage the equipment.

Read and follow

all warnings at the beginning of this
manual before operating the unit.

Use only with refrigerant type R-134a!

Cross-contamination with other refriger-
ant types will cause severe damage to the
station and to tools and equipment.
Do not mix refrigerant types through a
system or in the same container!

1. Attach the station’s yellow charging

hose to a full refrigerant tank, as
follows:

Disposable tanks — Connect the
yellow hose, open the tank’s valve,
and place the inverted tank (with its
valve down) on the scale platform.
Be sure to center the tank over the
stud welding point. Use only tanks
designed for use with R-134a, includ-
ing Acme threads on the fittings.

5. Plug the station into the proper

voltage outlet, and turn on the MAIN
POWER switch.

6. Simultaneously press the ENTER

and zero keys on the keypad to access
the manual diagnostic mode.

7. Press “1” on the keypad to start the

pump.

8. While the pump is running, add

enough vacuum pump oil so that the
oil level is even with the line on the
reservoir’s sight glass.

9. Press “1” or the RESET CYCLE key

on the keypad to stop the pump.

10. Replace the black plug on the oil fill

port.

IMPORTANT!

For maximum perfor-

mance, change the vacuum pump oil
frequently (approximately after every
four hours of running time). We recom-
mend using our Premium High Vacuum
Pump Oil; it is specifically blended to
maintain maximum viscosity at normal
running temperatures and to improve
cold weather starts (see the “Replace-
ment Parts List”).

Read and follow the detailed instructions
in the Vacu-Master

®

Vacuum Pump

Operating Manual. You do not need to
return the warranty registration card
contained in the Vacu-Master

®

Vacuum

Pump Operating Manual — return only
the warranty registration card attached
to the station to validate your warranty.

Diagram of Disposable Tank Installation

Set Up
Instructions

Bulk Refrigerant Tank

(Not Included)

Tank

Valve Handle

Ball

Valve

Yellow Hose To

Refrigerant

Solenoid

Dual Purpose

Hold-Down

Bracket

!

!

(Continued)

Advertising