Ronan LS-D User Manual
Specifications, Models ls-s and ls-d source holders
Ronan Measurements Division · 8050 Production Drive Florence, KY 41042
(859) 342-8500 · FAX (859) 342-6426
Web: www.ronanmeasure.com · E-Mail: [email protected]
SPECIFICATIONS
Description:
The LS series of source holders are approved for General License
installations on level applications when used with an interlock
device. The source is available in both single (LS-S) and dual
(LS-D) port configurations for installations where vessels are close
to each other and one source can be used on both. i.e. Flyash
Hoppers
Source Holder:
Construction:
Stainless Steel Housing With Lead, or Tungsten
S
hielding Surrounding A Doubly Encapsulated,
Heliarc-Welded Stainless Steel Source Capsule.
Single or Dual Port Configurations.
Handle:
“T” Handle Rotates 90 Degrees From On/Off Positions.
Shutter Options Include: Remote Cable, Remote On/Off
Indicators, Intelocking Device, Air Actuation.
Weight:
Appx. 55 lbs (25g)
Temperature Limit:
300 Degrees F. (148 Degrees C)
Collimation:
Beam Pattern(s) up to 20 Degrees. (Dependant Upon
Application)
Maximum Source Size:
150 mCi (5.6 GBq) Cs-137
Radiation Fields:
Meets all International Standards for Surface Radiation Limits.
MODELS LS-S and LS-D SOURCE HOLDERS