Salamander Designs Synergy System SB337C/B - Manual

SYNERGY 337
Triple Assembly
Includes:
(1) Triple 30 Unit
(2) S30 Side Panels
(3) S30 Doors
(6) Adjustable Shelves
Salamander Designs Ltd. 800-535-5659 • www.SalamanderDesigns.com ©2005 Salamander Designs Ltd. ® Synergy System, Patented.
Limited Warranty
For five full years Salamander Designs Ltd will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any damage to or
destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, in the original carton and pack-
ing material. Any damage incurred in a shipment not in original packaging shall be the responsibility of the owner. Warranty repairs will be returned prepaid, via UPS within the continental U.S.A. only.
Doc No. 500-790/v4.12 337 -1/4
BEFORE YOU BEGIN:
• Unpack all parts before beginning and refer to the drawing below.
• Shelf pegs and door hinges must slide into the channels of the post in the correct order.
They cannot be removed individually without disassembling the whole unit.
! !
Adjustable
Shelf (6)
Bottom Shelf (1)
Joint Connector Bolt 300-540 (8)
Sides (2)
Rear Panel (3)
Foot & Nut P-300-350 (8)
Door (3) Aluminum Post (8)
Washer 300-470 (8)
Shelf Peg
PHK-370 Right
(12)
PHK-380 Left (12)