Salamander Designs Synergy System SB236C/B User Manual
Synergy 236, Triple assembly, Before you begin
BEFORE YOU BEGIN:
• Unpack all parts before beginning and refer to the drawing below.
• Shelf pegs and door hinges must slide into the channels of the post in the correct order.
They cannot be removed individually without disassembling the whole unit.
SYNERGY 236
Triple Assembly
Includes:
(1) Triple 20 Unit
(2) S20 Side Panels
(1) Media Drawer
(2) S20 Doors
(3) Adjustable Shelves
!
!
Drawer Slide (2)
Adjustable
Shelf (3)
Bottom Shelf (1)
Joint Connector Bolt 300-540 (8)
Sides (2)
Rear Panel (3)
Media Drawer
Foot & Nut P-300-350 (8)
Door (2)
Aluminum Post (8)
Washer 300-470 (8)
Shelf Peg
PHK-370 Right
(6)
PHK-380 Left
(6)
Salamander Designs Ltd. 800-535-5659 • www.SalamanderDesigns.com
©2005 Salamander Designs Ltd. ® Synergy System, Patented.
Limited Warranty
For five full years Salamander Designs Ltd will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any damage to or
destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, in the original carton and packing
material. Any damage incurred in a shipment not in original packaging shall be the responsibility of the owner. Warranty repairs will be returned prepaid, via UPS within the continental U.S.A. only.
Doc No. 500-785/v4.12 236 -1/5