Salamander Designs SA/HDC/4 - Manual

HEAVY DUTY
CASTERS
SYNERGY
CABINET
POSITIONING WHEEL BASEPLATE
DRILLING PATTERN
A. Position the wheel baseplate so that it matches the drawing below:
B. Drill holes & fasten as shown in the drilling pattern to the left:
Greyed holes use joint connector bolts (JCB)
Black holes will need to be pre-drilled before attaching with supplied
wood screw. Using a drill & supplied bit, predrill to the marked depth
of the bit. Attach with supplied wood screws.
Not used.
C. Fasten posts not requiring wheels with provided JCB bolts.
Doc No. 500-426/v11.10 ©2010 Salamander Designs Ltd.
WHEEL PLACEMENT
CHAMELEON SYNERGY
SINGLES
TWINS
TRIPLES
QUADS
WHEELS
WITH BRAKES
A
B
C
CHAMELEON
CABINET
SYNERGY
CHAMELEON
CABINET BOTTOM
CABINET BOTTOM
MARKED DEPTH
WOOD SCREW