Salamander Designs BP1 Wireless Recliner Kit - Manual

BATTERY PACK INSTALLATION
SALAMANDER SEATING
To install:
1. Unplug power supply from actuator
2. Plug this end into actuator
(as shown in figure 3)
Actuator
Plug
Figure 3
Figure 1 Figure 2
3. Plug this end into battery pack
4. Place battery behind
chair access panel for
ease when charging.
INCLUDES:
For Use With All
Salamander Seating Styles.
Full Charge 8-10 hours. Charger
needs to be unplugged when
not in use.
Approximated Cycles:
400 recharges for its life. (regularly
used application)
200 cycles per charge. (regularly
used application)
Doc No. 500-870
©2013 Salamander Designs Ltd.
Charger
Adapter Cable
Battery Pack