Securitron SPK - Manual

Securitron Magnalock Corp. www.securitron.com
ASSA ABLOY, the global leader
Tel 800.624.5625 [email protected]
in door opening solutions
© Copyright, 2011, all rights reserved PN# 500-22105
Page 1 Rev. B, 08/11
SPK SOLAR PANEL KIT INSTALLATION INSTRUCTIONS
1. PV ARRAY PANEL INSTALLATION
1.1 INSTALLING THE PANEL
The following exploded illustration Figure 2 shows the included hardware required to properly
mount the array panel to a vertical pole. (20 Watt PV array panel shown).
Figure 2
The swivel brackets are to be mounted to the sides of the array panel as shown in Figure 3.
1. Insert the square nuts into the cutouts
at each side of the panel and slide in
slot to initial position.
2. Assemble swivel brackets with the
included hardware to the nuts.
3. Tighten screws securely when brackets
are adjusted to the desired position.
Figure 3
PV ARRAY
PANEL
6X 10-32 X 7/16
LONG PPH SCREW
2X #10 SPLIT
LOCK WASHER
6X #10 PLAIN
FLAT WASHER
(REFERENCE) POLE
NOT INCLUDED
2X 10-32 SQUARE NUT
PANEL MOUNTING
CROSS MEMBER
2X PANEL MOUNTING
SWIVEL BRACKET
1/4-20 U-BOLT
2X 1/4 PLAIN
FLAT WASHER
2X 1/4-20 HEX
LOCK NUT
4X 10-32 HEX
K-LOCK NUT