Securitron iMXDa_iEXDa Addendum - Manual

Securitron Magnalock Corp. www.securitron.com
ASSA ABLOY, the global leader
Tel 800.624.5625 [email protected]
in door opening solutions
© Copyright, 2011, all rights reserved PN# 500-19550
Page 1 Rev. B, 08/11
ADDENDUM FOR iMXDa/iEXDa INTEGRATED EXIT DELAY SYSTEM
iMXDaCH – City of Chicago Operational Information
This addendum is a decisive supplemental to the iMXDa/iEXDa Installation and Operating Instructions (P/N
500-22175) and iMXDa/iEXDa Quick Start Guide (P/N 500-22310) which addresses the operating
notifications specifically related to compliance with the City of Chicago and related Municipal Codes.
For compliance with Section 13-160-269(a)(7) of the Municipal Code:
 The Securitron – Model iMXDaCH Integrated Movement Exit Delay System will contain no selectable
operating modes for the logic timers or specialized alarm reminder operations.
 The timing system is fixed with a 1 second initiating time (nuisance timed alarm) plus a 14-second
(irrevocable timed alarm) sequence and delayed lock release and egress implementation.
 Automatic re-locking only occurs if the door opens and returns to the closed position and then
remains closed for a full 30 second period thereafter.
For compliance with Section 13-160-269(a)(1) of the Municipal Code:
 The Securitron – Model iMXDaCH Integrated Movement Exit Delay System must be used with a UL
listed fire alarm system.
 The fire alarm system must contain latching type dry contacts designated for “auxiliary” operations.
 The contacts must activate for both the alarm and troubled conditions.
For compliance with Section 13-160-269(a) of the Municipal Code:
 The Securitron – Model iMXDaCH Integrated Movement Exit Delay System must be used with a
Securitron ~ Model BPS-CH Series Power Supply.
 The power supply unit is to be supplied without provisions for battery back-up.
Door Travel Limitations and/or Restrictions:
 The Securitron – Model iMXDaCH Integrated Exit Movement Delay System must be configured to
trigger the egress initiating within one-eighth inch (1/8”) of door movement.
 The maximum door travel is limited to a one-half inch (1/2”) movement measured at the strike
armature/sex bolt mounting location.
WIRING DIAGRAM FOR iMXDaCH