SecurityMan MiniAirWatch - Manual (Page 14)

14
Installation
A) Setting up the Receiver
Connect the antenna to the receiver.
B) Setting up the Receiver with TV/Monitor
1) Connect one end of the A/V cable to the A/V out jacks of the
Receiver. Connect the other end to your TV/Monitor A/V jacks.
2) Plug the Receiver’s Power Supply (12V DC Adapter) into any wall out-
let and plug its jack into the Receiver.
3) Turn the Receiver power switch on.
4) Position the Receiver in a convenient location such as top of a TV
and adjust the antenna.
AUDIO VIDEO
TV/ Monitor
Connect to 12V DC Adapter
A/V Cable
POWER
DC12V
AUDIO VIDEO
CH4 CH3
CH2 CH1 SET