SecurityMan SM-202T - Manual

• 1 x wireless outdoor/indoor color camera with wall-mount bracket
• 1 x 8V power AC adapter
• Mounting screws
1) Connect the adapter (DC 8V 300mA) to the camera.
2) Set the camera to desired channel.
Power Outlet
3) Connect the antenna to the receiver.
4) Connect the receiver to a monitor/TV with AV cable (yellow for
video and red audio). Turn on the monitor/TV and select AV mode.
5) Connect the power jack of adapter (DC 7.5V 300mA) to receiver.
Press the Power ON/OFF button and the channel indicator
lights up green.
6) Press the Channel Select Button “CH” on the receiver until the
channel indicator matches to the channel on the corresponding
camera, and monitor/TV will display pictures.
7) Adjust the brightness, contrast and color of the monitor/TV
for the perfect effect.
2.4GHz Wireless Outdoor/Indoor Bullet Color Camera w/Night Vision & Audio (SM-202T)
SecurityMan
®
Specifications (SM-202T)
1/4-inch CMOS
510 X 492 (NTSC)
45-50°
3 Lux/F2.0 & 0Lux (IR ON)
Automatic
ISM 2400~2483 MHz 4CH
(Auto-loop/Manual)
10mW/CE; 2mW/FCC
FM
18MHzDC +8V 300mA
200mA (IR ON) & 90mA (IR OFF)
100m (300ft)
7m (23ft)
-10°C~50°C / 14°F~122°F
-20°C~60°C / -4°F~140°F
85% RH
Built-in
IP54 Image Sensor
CMOS Total Pixels
View Angle
Minimum Illumination
Gain Control
Frequency
Transmission Power
Modulation ModeBandwidth
Power Supply
Consumption Current
Unobstructed Effective Range
Night Vision Range
Operation Temperature
Storage Temperature
Operation Humidity
Microphone
Weatherproof Rating