SecurityMan SM-2100 - Manual

Specifications:
Package contents:
Easy Setup Guide:
Dummy Outdoor/Indoor Speed Dome Camera w/LED
SM-2100
• Dummy speed dome camera type with flashing LED
• Weather resistant
• Plastic material
• Wall mount/ceiling mount bracket
• Powered by 2*AA batteries (not included)
• Dimension: 24(H) x 12.8 (W) cm (9.5 x 5 inches)
• Weight (net/gross): 0.6 lbs / 0.86 lbs
• Dummy camera, bracket and screws, two security signs (stickers), and manual
1. Open the camera by twisting off the dome (counterclockwise) from the mounting base plate.
2. Place 2 AA size 1.5V batteries (not included) into the compartment as indicated by the polarity symbols (+ and -) marked inside.
3. The red LED light will automatically start to flash (batteries can last up to one year.) as illustrated below.
4. Reattach the dome to the mounting base plate (match groves and turn clockwise).
5. Locate a suitable location and then mount the camera with the screws provided.
6. Reposition and adjust the camera angle as desired.
Notice:
SecurityMan shall not be responsible for any consequences of illegal conducts by users. It is recommended to consult with user’s lawyer for any applicable
local laws before use.
When budget is limited for real cameras, a recommendation (although not a legal advice) is to combine dummy cameras with real cameras. Integrating with
real cameras, while being strategic, allows adequate surveillance coverage the notion of cameras all over the premise.
It is user’s responsibility to check the flashing LED light periodically. Replace the batteries when the LED light does not flash.
SecurityMan dummy camera SM-2100 is designed as a professional security camera for deterring unwanted intruders by just a fraction of the cost of a real
camera. It comes with a flashing red LED light which enhances the presence of the camera. Multiple dummy cameras can be used to mix in with real cameras
or individually to increase security presence anywhere.