Avenview SPLIT-DVI Series SPLIT-DVI-5 - Manual (Page 5)

www.avenview.com 5
1.7 Installation
The installation of SPLIT-DVI-2 or SPLIT-DVI-5 is simple:
1. Power off display source such as DVD Player, Set-top box
2. Connect the DVI cable into each display source and display
3. Connect DVI cable which is attached to display source into SPLIT-DVI-2 or SPLIT-DVI-5
4. Connect Power to SPLIT-DVI-2 or SPLIT-DVI-5
5. For HDTV Signal select HDTV from Function Switch and for PC Signal select PC
HDTV Signal
PC Signal