SecurityMan DigioutLCD - Manual (Page 33)

29
• • Adding Cameras
To add a camera to your system simply highlight any of the
available cameras/channels (unlocked) and press the OK button
on the LCDDVR. Once selected, a confirmation screen will pop up
asking you to confirm ( YES) or cancel (NO) your selection, use
the LEFT and RIGHT buttons to make your selection and press
the OK button to confirm. During the registration process a pop
up window showing “ Add/Remove Camera” will be displayed for
approximately 10 seconds.
NOTE: When adding a camera, press the OK button on the
LCDDVR to confirm the adding camera selection and then
immediately press the “ Pairing” button located on the back of the
camera 3 consecutive times (press, release, press, release, and
press and release). There is a 10 second grace period for adding
cameras, if pairing is unsuccessful before the 10 second grace
period has expired, then a pop up displaying “ operation failed”
will appear. Pairing must be done within 20 ft from the LCDDVR.