SecurityMan iCamDVR (early 2008 shipment) - Manual (Page 25)

Figure 32 - Setup Schedule Recording
24 | SecurityMan
The Schedule Configuration panel contains Schedule
Record, Motion Detection and alarm output setup for
SuperDVR. Schedule Record can be use to setup recording
based on scheduling the days of the week and any time of
the days to record.
To setup schedule time recording, select any of the inde-
pendent CaM1 through CAM4 (STEP 1), click on any color
days of the week to highlight selection (STEP 2), and then
click on “add or edit” to edit/modify the days of the week
and the time of the days (STEP 3), shown Figure32 below.
The above windows will appear for the selected camera to
setup schedule time and days of the week for recording.
Select or deselect any days of the week between Monday
through Sunday and setup a time of the selected day(s)
ranging from 0 to 24 hours. Press oK to accept all setups
and to exit out of the “add or edit” windows. Press Select
all to auto select schedule from Monday to Sunday or
press Cancel to cancel editing.
Figure 31 - Schedule Configuration
Figure 33 - Edit Schedule