SilverStone HDDBOOST - Manual (Page 4)

Installation guide
1. Please first defragment your hard drive.
2. Install a solid state disk (SSD) to HDDBOOST circuit board,
make sure the connection to the SATA connector is secured
then fasten the SSD with two screws from the bottom.
3. Install HDDBOOST
into the computer chassis.
[Wiring Diagram Definition]
4. Please refer to the wiring
diagram for connecting
wires, connect the SATA
cable to system hard disk
and motherboard.
3
SATA to MB *Not required
SATA POWER from PSU
SATA to HDD
MB
HDD POWER