SKC 575 Series Passive Samplers for Organic Vapors User Manual

Skc 575 series passive samplers for organic vapors, Operating instructions, Performance profi le

Advertising
background image

Operating Instructions

863 Valley View Road, Eighty Four, PA 15330 USA

Tel: 724-941-9701 Fax: 724-941-1369 e-mail: [email protected]

SKC 575 Series Passive Samplers

for Organic Vapors

SKC 575 Series Passive Samplers are small ready-to-use samplers that provide
superior collection of organic vapors without the use of a sample pump. SKC
has scientifi cally validated the sampling rates for many chemicals and other critical
sampling parameters of the 575 Series Passive Samplers to meet OSHA/ASTM/
ANSI requirements. SKC 575 Series Passive Samplers have been identifi ed as a viable
alternative to active sampling in six OSHA methods.

Performance Profi le

Sorbent/Amount:

575-001: Charcoal, 350 mg

575-002: Anasorb

®

747, 500 mg

575-003: Anasorb 727, 300 mg

Housing material: Nylon
Diameter:

1.4 in (3.5 cm)

Length
(including clip):

2.5 in (6.3 cm)

Depth:

0.6 in (1.5 cm)

Concentration range: Varies - dependent upon chemical of interest
Analysis:

Solvent desorption, Gas Chromatography/Flame Ionization
Detector (GC/FID)

Shelf-life:

2 years at < 39.2 F (4 C)

Storage:

Before use: Store at ambient temperature. For low-level
measurements, SKC recommends storage at < 39.2 F (4 C).

Aft er use: For sample storage information, refer to the
method for the chemical of interest. Expedited shipping is
recommended. See Storage.

Sample time:

Validated for 15-min and 8-hr occupational exposure sampling.
Lab and fi eld studies conducted with several compounds show
suitability for 24-hr air sampling.

Sampling rate:

Dependent upon chemical of interest. For compound-specifi c
sampling rates, visit www.skcinc.com and click on Sampling Guides.

Advertising