SKC 233, 240, 243, 253, 263 Series Single Stainless Steel or PTFE Fitted Bag - Manual (Page 3)

SKC sample bags are available in FluoroFilm, SamplePro ® FlexFilm, Standard FlexFoil ® ,
and FlexFoil PLUS with fi ttings made of stainless steel, polypropylene, or PTFE in sizes
ranging from 0.5 to 100 liters. SKC also manufactures custom sample bags. Contact SKC
at 724-941-9701 or [email protected].
For sample bag stability reports,
visit www.skcinc.com/bags.asp.
Accessories
Replacement Septa, pk/10........................................................................................ Cat. No. 233-01-RS
PTFE Tubing, fi ts over bag fi tting and Grab Air Sample Pump fi ttings,
3/16-inch ID, 1/4-inch OD, 10 feet ................................................................................. Cat. No. 231-9-23
PTFE Tubing, fi ts inside bag fi tting, 1/16-inch ID, 1/8-inch OD, 10 feet ....................... Cat. No. 231-9-21
PTFE Tubing, fi ts Vac-U-Chamber inlet and 222 Pump fi ttings,
1/4-inch ID, 5/16-inch OD ......................................................................... 10 feet ......... Cat. No. 231-937
50 feet ......... Cat. No. 231-924
Twin Port Pocket Pump ® Tubing Adapter Kit includes two lengths
of silicone tubing: 1/8-inch ID, 1/4-inch OD for bag fi tting and 3/16-inch ID,
3/8-inch OD for pump fi tting; use with Cat. No. 231-9-23 PTFE tubing (above)............ Cat. No. 231-926
For more product information or assistance with applications, contact
SKC Technical Service at [email protected].
SKC Limited Warranty and Return Policy
SKC products are subject to the SKC Limited Warranty and Return Policy, which
provides SKC’s sole liability and the buyer’s exclusive remedy. To view the com-
plete SKC Limited Warranty and Return Policy, go to htt p://www.skcinc.com/
warranty.asp.
3