Sonic Charge Bitspeek - Manual (Page 7)

PreSonus Studio One
1. Turn the MIDI switch to “On” in
Bitspeek and turn down Tracking
to 0%.
2. Add an Instrument track.
3. Select
Bitspeek as destination for
the new track.
Image-Line FL Studio 10
1. Turn the MIDI switch to “On” in
Bitspeek and turn down Tracking
to 0%.
2. Select a free input port under the
MIDI section in the plug-in set-
tings.
3. Add a “MIDI Out” channel.
4. In the channel setting, select the
same port number as you did for
Bitspeek .
Cakewalk Sonar X1
1. Enter the Cakewalk Plug-in Man-
ager, select Bitspeek , click “Plug-
in Properties” and choose to
“Configure as synth”.
2. Add the new Instrument version
of Bitspeek and remove the Effect
version from your Plug-in Layout.
3. Insert Bitspeek in the FX chain as
a “Soft Synth” instead of an
“Audio FX”.
4. Turn the MIDI switch to “On” in
Bitspeek and turn down Tracking
to 0%.
5. Insert a MIDI track.
6. Select
Bitspeek as output for the
new track.
! © 2011 NuEdge Development! 7