Sonnet Technologies G5 Jive User Manual
Page 12
Advertising
12
Figure 42
Figure 41
Figure 40
Figure 39
Installation Steps for Power Mac G5 with PCI-X Slots
2. Connect the power adapter cable to the drives; verify the con-
nectors are plugged in securely (Figure 39).
3. Pull the fan/speaker assembly part way out of the computer
(approximately 2"), but leave it connected
(Figure 40).
4. Set the drives next to the computer and route the power adapter
cable’s remaining connectors through the opening behind the
fan/speaker assembly
(Figure 41).
5. Continue routing the connectors through the opening into the
optical drive bay where the ribbon and drive power cables are
located
(Figure 42).
power adapter cable
fan/speaker assembly
power adapter cable
fan/speaker assembly
ribbon cable
power adapter cable
Advertising