Sonnet Technologies AV_HPV Card Video Adapter Kit - Manual (Page 3)

11. Affix AV or HPV Card to Video Adapter Board
HPV Card Installation
• Orient the video adapter board in front of you as shown in Figure 10.
Using a small Phillips screwdriver, remove the upper left stand-off from
the adapter board (Figure 10).
• Align the HPV card directly over the video adapter board with the
connector of the HPV card facing upward (Figure 11). The holes
on the HPV card should align directly with the upper right and lower
left standoffs on the adapter board.
• Secure the HPV card to the video adapter board with the two nuts
(Figure 12) supplied with the adapter kit.
• Continue with the instructions at step 12.
AV Card Installation
• Orient the video adapter board in front of you as shown in Figure 13.
Align the AV card directly over the adapter board with the connector of
the AV card facing upward (Figure 13). The holes on the AV card
should align directly with the standoffs on the adapter board.
• Secure the AV card to the video adapter board with the two nuts
(Figure 14) supplied with the adapter kit.
• Continue with the instructions at step 12.
(Installation instructions continued…)
Sonnet AV/HPV Card Video Adapter Kit
3
standoff
HPV card connector facing upwards
Figure 10: Remove upper left standoff
Figure 12: Secure HPV card to adapter board with nuts
Figure 11: Orient HPV card over adapter board
AV card connector facing upward
Figure 13: Orient AV card over adapter board
Figure 14: Secure AV card to adapter board with nuts