Using music link without acura tts, Continued) – Acura Music Link BAM30192 User Manual

Page 7

Advertising
background image

7

Using Music Link Without Acura TTS

(Continued)

Using the Audio System Controls
Music Link uses the CD changer commands on your
audio system to control iPod functions. Each disc
number (5–6) corresponds with a play mode in Music
Link. To select a play mode, use the controls on the
audio system. When using Music Link, you can select a
disc number, even if your vehicle is not equipped with a
CD changer.

NOTE: Acura factory-installed audio systems vary from
model to model and may have different button names
for the same functions.

To select the CD player/changer, press the appropriate

button on your vehicle's audio system. Depending on
your Acura model, the button may be named CD,
CD/AUX, CD/AUX/XM, CD/DVD, CD/CHG, DISC, or
DISC/TAPE.

To select a play mode, use the DISC– and DISC+

buttons (usually Preset 5 and Preset 6, respectively)
or the CH DISC (

and

) buttons. On some models,

the selected disc number is shown in the audio
system display. Then press and hold either SEEK/SKIP
button ( /– or /+) for at least 1 full second (or, on
some models, until you hear a beep).

NOTES:
• Depending on the model, the steering wheel audio

controls may not operate or may have limited
operation when using Music Link.

• It is not necessary to eject any CDs in the CD

player/changer to use Music Link. Press the CD
button (or appropriate button) to toggle between the
CD player/changer and Music Link.

S Table of Contents

Audio System Controls

NOTE: The buttons on your Acura may differ.

Getting Started Quickly

Use to select

CD player/

changer.

Use to select disc (5–6).

Use to play

a mode and

to seek/skip
forward and

backward.

Advertising