Harwin Z30-020 - Manual

IS-13 Issue: 3 Date: 03.10.07 C/Note: 9874 Page 1 of 4
HAND CRIMP TOOL Z30-020
This Hand Crimp Tool has been designed for use with the following crimp contacts:
M30-1000046................................ 1.25mm Pitch Crimp Contacts, Reeled, Tin
M30-1010046................................ 1.25mm Pitch Crimp Contacts, Strip of 10, Tin
TOOL DESCRIPTION
The Z30-020 Hand Crimp Tool consists of a ratchet mechanism hand tool and a set of jaws. The
jaws comprise of upper and lower crimp dies.
The contact is correctly crimped when the tool is free to open at the fully closed position, i.e.
when the ratchet releases.
Harwin North America Harwin Europe Harwin Asia
T: +1 603 893 5376 F: +1 603 893 5396 T: +44 (0) 23 9231 4545 F: +44 (0) 23 9231 4590 T: +65 6 779 4909 F: +65 6 779 3868
E: [email protected] W: www.harwin.com E: [email protected] W: www.harwin.com E: [email protected] W: www.harwin.com.sg