Acoustic Research ART1 - Manual (Page 16)

ART1
12
Software Version
1.
Turn the rotary encoder to highlight SOFTWARE VERSION.
2. Press OK to confirm and display the following screen:
3. After viewing the version information, press OK to exit the menu screen.
Factory Default
1.
Turn the rotary encoder to highlight FACTORY DEFAULT.
2. Press OK to confirm and display the following screen:
3. Turn the rotary encoder to highlight NO or YES. Selecting YES will restore all original factory
settings and will delete all alarm and preset information you entered.
4. Press OK to restore factory default settings and exit the setup menu.
Power On Menu Options
1. With the unit powered on, press the MENU button to access the following menu:
2. Turn the Rotary Encoder left/right to highlight a menu option.
3. Press OK to select the highlighted menu choice.
Select Mode
1.
Turn the Rotary Encoder left/right to highlight FM, AM, iPod, AUX or Nature (to play one of
four included nature sounds).
2. Press OK to select the highlighted menu choice.
3. The unit provides on-screen instructions for some modes.
•
FM: Turn the rotary encoder for instructions.
• AM: Turn the rotary encoder for instructions.
• iPod: Follow the instructions on the screen.
• AUX: Select playback through the connected auxiliary device.
• Nature: Turn the rotary encoder to choose from four possible nature sounds (OCEAN,