Harwin Z80-299 - Manual

IS-30 Issue: 2 Date: 22.09.10 C/Note: 10949 Page 1 of 4
DATAMATE L-TEK DE-LATCHING TOOL Z80-299
This hand tool has been designed for separating mated Female/Male Datamate L-Tek assemblies where
latches have been used to secure a pair of connectors. It can also be used in friction applications if
required.
This hand tool has been designed for use on single row (SIL) and double row (DIL) connectors.
This tool will fit the following Number of contacts for DIL connectors: 04, 06, 08, 10, 12, 14, 16, 18, 20,
26, 34, and 44.
This tool will fit the following number of contacts for SIL connectors: 02, 03, 04, 05, 06, 07, 17, and 22.
This tool comes supplied in a plastic storage box which contains the following items;
Harwin North America Harwin Europe Harwin Asia
T: +1 603 893 5376 F: +1 603 893 5396 T: +44 (0) 23 9231 4545 F: +44 (0) 23 9231 4590 T: +65 6 779 4909 F: +65 6 779 3868
E: [email protected] W: www.harwin.com E: [email protected] W: www.harwin.com E: [email protected] W: www.harwin.com.sg
Quantity and Description Part number
1 x Handle Z80-2990601
1 x Cap for handle Z80-2990701
2 x Hardened Adjustable Jaw
assemblies (Can be stored in handle) Jaw Part No. Z80-2990500
Positional Screw part No.
Z80-2990800
3 x Stainless Steel multi-positional bars;
1 x 60mm long
1 x 34mm long
1 x 32mm long
Z80-2990200
Z80-2990300
Z80-2990400