Harwin Z90-293 - Manual

IS-34 Issue: 3 Date: 19.03.2013 C/Note: 11973 Page 1 of 5
HAND CRIMP TOOLS Z80-292 & Z80-293
These Hand Crimp Tools have been designed for use with the following Datamate Mix-Tek coax Crimp
[when used with positioner Z80-291]:
M80-305 to 307…………………………………..Straight female coax crimp contact
(Used in Mix-Tek female crimp connectors)
M80-308 & 309... (Z80-293 only)…………..90° female coax crimp contact
(Used in Mix-Tek female crimp connectors)
M80-315 to 317……………………….. ………….Straight male coax crimp contact
(Used in Mix-Tek male crimp connectors)
M80-318 & 319... (Z80-293 only)……………90° male coax crimp contact
(Used in Mix-Tek male crimp connectors)
Harwin North America Harwin Europe Harwin Asia
T: +1 603 893 5376 F: +1 603 893 5396 T: +44 (0) 23 9231 4545 F: +44 (0) 23 9231 4590 T: +65 6 779 4909 F: +65 6 779 3868
E: [email protected] W: www.harwin.com E: [email protected] W: www.harwin.com E: [email protected] W: www.harwinasia.com
Z80-293
Tool in open position
Selector Index
Z80-292
Tool in closed position
Die Set
Positioner
Positioner
Guide
Safety Clip