Hochiki YBN-R/3M - Manual (Page 2)

2-3-0-751/ISS1/JUL06
Wiring and Head Locking Mechanism
The bases should be wired as shown in Fig 2 below.
The ESP Marine Approved Range of Sensors can
also be locked onto the relevant base by removing a
plastic lug on the underside of the sensor, please
refer to Fig 1. The Sensor can then be removed by
using a special Removal Tool (TSC-A100/ALG),
which is available from Hochiki Europe (UK) Ltd.
A: Loop (+) B: Loop (-) C: Cable Screen
Hochiki Europe (UK) Ltd
Grosvenor Road, Gillingham Business Park,
Gillingham, Kent, ME8 0SA, England
Telephone: +44(0)1634 260133 Facsimile: +44(0)1634 260132
Email: [email protected]
Web: www.hochikieurope.com
Hochiki Europe (UK) Ltd. reserves the right to alter the specification of
its products from time to time without notice. Although every effort has
been made to ensure the accuracy of the information contained within
this document it is not warranted or represented by Hochiki Europe (UK)
Ltd. to be a complete and up-to-date description. Please check our web
site for the latest version of this document.
Fig.1
Remove tab carefully
using a pair of pliers
NOTE:
‰ Maximum current for remote
indicator is 10mA.
‰ Base fixing centres are 48mm to
74mm
‰ Maximum wire thickness is
2.5mm
2
/terminal
Fig.2