Hochiki CCP-E-IS - Manual (Page 2)

2-3-0-563/ISS1/SEPT03
TESTING
To test the call point insert the supplied test key into the aperture at
the bottom of the unit, the glass will drop and simulate operation of
the call point (see Fig.4). To reset remove the key.
Fig. 4
Specification
Ordering Code CCP-E-IS
Plastic Back Box Ordering Codes SR2T (2 terminals) / SR3T (3 terminals)
Operating Voltage 15-30V
Resistor 470 Ω / 2.5W
Operating & Storage Temperature Range -30 °C to + 70°C
Maximum Humidity 95%RH - Non Condensing (at 40 °C)
Colour Red
Case Material
Nylon / Self-extinguishing Modified Polyphenelene
Oxide
IP Rating IP24D
Flush Unit - L88 x H88 x D20 / 100
Dimensions (mm) / Weight (g)
Surface Box - L88 x H88 x D32 / 80
Maximum Wire Thickness 2.5mm 2 Cables
Hochiki Europe (UK) Ltd
Grosvenor Road, Gillingham Business Park,
Gillingham, Kent, ME8 0SA, England
Telephone: +44(0)1634 260133 Facsimile: +44(0)1634 260132
Email: [email protected]
Web: www.hochikieurope.com
Hochiki Europe (UK) Ltd. reserves the right to alter the specification of its products from time to time without notice. Although every effort
has been made to ensure the accuracy of the information contained within this document it is not warranted or represented by Hochiki
Europe (UK) Ltd. to be a complete and up-to-date description. Please check our web site for the latest version of this document.