HTP SSU-119SE - Manual (Page 31)

31
LP-199 REV. 4.15.14
Figure 14 – SE Model Parts Breakdown – LP-199-D
Item # Replacement Part # Description Qty.
1 TP1400 ¾” RELIEF VALVE 1
2 6060P-1008 THERMOSTAT 1
3 6060P-630 GREEN GROUND WIRE (w/RING) 1
4 6060P-633 THERMODISC MOUNTING CLIP 1
5 6060P-994 PLASTIC PROTECTIVE COVER 1
6 6060P-635 MINERAL WOOL INSULATION 1
7 6060P-187 ELECTRICAL ENCLOSURE COVER 1
8 6075P-006 #8 X 3/4 SELF TAPPING SCREWS - ELECTRICAL COVER 2
9 6060P-632 5/16-18 HEX NUT - THERMODISC MOUNTING CLIP 2
10 6060P-938 ELECTRIC ELEMENT (w/O-RING) 1
11 N/A O-RING (#213 EDPM)
12 8600P-054 SENSOR CLIP W/ NUT 1
Table 6 – SE Model Replacement Parts List
NOTE: If the heating element needs replacement, it is VERY important to use the same voltage, wattage, and construction. When
replacing element, use only HTP part # 6060P-938. Use of a generic element may lead to early replacement element and/or water
heater failure, and WILL VOID the warranty.