Transporting and handling – IAI America RCP2CR-SS8C User Manual
Page 17
9
7.
Transporting and Handling
7.1
Handling the Actuator
7.1.1
Handling the Packed Unit
Unless otherwise specified, each actuator (axis) is shipped individually. Please make sure that the shipping box
is not dropped or subjected to strong impact during transport.
•
Operators should not carry heavy shipping boxes by themselves.
•
If the shipping box is left standing, it should be in a horizontal position.
•
Do not climb on top of the shipping box.
•
Do not place heavy objects which may deform the shipping box or objects with concentrated loads on top of
the box.
7.1.2
Handling the Actuator after It is Unpacked
Lift the actuator up by the base to remove it from the packing.
•
When carrying the actuator, make sure not to bump it. Take particular care with the front cover and motor
cover.
•
Do not exert excessive force on any part of the actuator.
•
Be careful not to cause the cables to receive a tensile force.
•
Be careful when handling the stainless sheet
The stainless sheet is designed very thin (thickness: 0.1mm) in order to ensure flexibility. Therefore, the
stainless sheet is easily dented or scratched. Once dented or scratched, the stainless sheet may break during
use.
* Please refer to “Name of Parts” for the names of the actuator parts.
Caution:
Do not press the sheet directly with hands.