IAI America IF - Manual (Page 35)

2. Installation
29
2.3 How to Install
Shown below is how to install the actuators to the machinery equipment.
2.3.1 Orientation of the Actuator Installation
Shown below are the basic concepts for the product attachment.
Pay special attention when deciding how to install the product (Except with custom-order
models).
{
: Available U : Precautions observing strictly × : Not available
Horizontal
installation
Vertical Mount Sideways
installation
Ceiling mount
installation
{
Ч Ч
U
Installation orientation
Horizontal Vertical Sideways Ceiling mount
Caution: In the ceiling mount installation, the screw cover may bend, and it will be likely
to interfere with the work part. When the stroke is 900mm or more, attach the
work piece away from the surface in Distance A.
Stroke [mm] Distance A [mm]
900 or more less than 1400 5 or more
1400 or more less than 2100 10 or more
2100 or more less than 2400 15 or more
2400 or more less than 2400 20 or more A