IAI America IX-NSN6016H User Manual
Page 36
28
2. External Dimensions
IX-NNC60
H
4-
11
24, counterbore depth 5
Reference surface
Note 1: The holes denoted by "2-M4, depth 8" are through
holes connecting both sides of the arm. Take note
that long mounting screws may contact the internal
mechanism parts.
Note 2: External force applied to the spacers must not exceed
30 N in the axial direction or 2 N
m in the rotating
direction (for each spacer).
Note 3: The LED operates only when the user provides a
circuit that receives controller I/O output signal and
supplies 24 VDC to the LED terminal in the user
connector.
(M
ec
han
ic
al end)
(M
ec
han
ic
al end)
14 hollow
Quick joint for
6 air tube
User connector
(D-sub connector for
user wiring)
(25-pin, socket,
fastener size M2.6)
BK SW
(Brake-release
switch)
Spacer outer
diameter
7
Height 10, M4,
depth 5 (Note 2)
Detail view of panel (1/2)
Quick joint for
4 air tube
ALM (Note 3)
Section A-A
Air joint (same
on opposite side)
Applicable tube: Outer diameter
12 (inner diameter 8)
Red
Yellow
Black
White