IAI America PS-24 User Manual
Page 21
Advertising
17
Both methods A (standard) and B below are available as a mounting method, however, the
characteristics for the output current relevant to the temperature will differ for each way. Use
within the range of its characteristics for each method.
Method A
(Standard)
Method B
Mounting
Surface
Output Current
(%)
110
100
90
80
70
60
50
40
30
20
10
0
Ambient Temp. (
oC)
A (Standard)
B
0
10
20
30
40
50
60
Note :
The main housing of the product gets so hot that it sometimes gives you a burn as it works
as a heat sink.
Do not touch while the power is ON, or even after the power is OFF until the heat calms
down.
Advertising