Audiovox VOH802 - Manual (Page 11)

-10-
AUXILIARY A/V STEREO INPUTS JACK
The VOH802 DL may be equipped with an auxiliary
A/V stereo input connector (optional).
These inputs are provided to facilitate the temporary
connection of optional audio/video equipment, such as
a camcorder or video game system. To play a source
with these inputs, an RCA patch cord is required to
connect the audio/video signals to their respective
jacks. Mono audio sources will require the use of an
RCA Y-cable (P/N 0892165) to connect to both right
and left inputs, if patch cords are installed into the
AUX inputs, the VIDEO INPUT 2 will be temporarily
bypassed. Once the connections have been made,
turn the VOH802 DL on and press the source button
on the VOH802 DL or the TV/Video button on the
remote control until “Video 2” is displayed on the
screen. The unit will now play the audio and video
signals from the accessory connected. The remote
control will not operate the accessory components.
VOH802DL Jack Panel
HEADPHONES HEADPHONES AUDIO R AUDIO L VIDEO
OPTIONAL ACCESSORIES
WIRELESS HEADPHONES
The VOH802 DL includes a built in Infrared
Transmitter for use with Audiovox Wireless
Headphones (P/N MVIRHS). Turning the Headphone
switch ON activates will activate the internal IR
Receiver, the volume can then be adjusted separately
with the controls on each headset. Any number of
wireless headphones can be used, but all must be
within a line of sight from the transmitter, as infrared
transmissions, like visible light travel only in a straight
line.
The VOH802 DL has a Jack labeled “to FM
Transmitter”, this Jack is for connection of an optional
Audiovox RF Transmitter (P/N WTXRF01). This
Transmitter is for use with the Audiovox Wireless RF
Headphones (P/N WHPRF01).
Consult the documentation accompanying the
Audiovox Wireless Headphones for more information.